Quest Mold and Asbestos Inspections and Testing

6 Tips to Avoid Mold Growth at Home

Molds are present everywhere. They are part of the ecological community and play an important role. However, a substantial concentration of molds at home is troublesome and even risky to health. Given this, it is unlikely to remove molds. Rather, it can be controlled. The goal is to maintain normal mold conditions at home. But how do we do that? Here are 7 helpful tips to avoid mold growth at home.

1. Control Moisture Level Indoor

Mold develops in areas where there is moisture. So, you must be keeping an eye on the level of humidity. Making sure that your house is dry is one of the ultimate important ways to prevent mold. 

Commonly, humidity levels need to be at least 55% or higher before the mold begins to sprout. Consider installing a hygrometer in your home too. This will check the moisture levels indoors. 

2. Ensure Proper Airflow or Ventilation

Proper ventilation reduces apparent contamination by clearing away some virus notions before they can fall out of the air and land on surfaces. You should also ensure proper ventilation. Air from the outside can help weaken the concentration of soaring contaminants indoors. 

3. Brush Moldy Exteriors and Materials with a Mold Cleaner

In brushing moldy surfaces with a mold cleaner, you will be needing a few things to kill the mold. You may use a soft brush along with water and 1/2 cup bleach mold cleaner. Scrub until traces of the mold are gone. 

Subsequently, let the bleach go through the surfaces and let it dry. After that, wipe it off. Remember to NOT RINSE the surfaces you have bleached.

4. Remove or Replace Carpets and Coverings That Have Been Soaked

You must replace a carpet or any coverings when it was soaked. In case the mold has grown on a soaked carpet, a simple cleaning will not work. If sprouting of mold takes place on more than one part of the carpet, it probably needs to be replaced. 

Carpet is one of the environments to artifice and withholds mold. Peculiarly in wet areas such as the shower room or basement.

In order to eliminate mold, try mixing one cup of Lysol spray into a bottle of hot water. Let it saturate into the impaired area for at least 25 minutes. You can use a vacuum cleaner particularly high-efficiency particulate air (HAPA) vacuum to thoroughly exterminate the remaining molds and toxins out of the carpet.

5. Clean And Dry Out Areas That Have Been Wet by Rain Especially After a Flood

There are absolutely numerous reasons and causes of mold growth. They all begin with one main thing. And it is water. The more moisture, the faster mold grows. 

Storms can cause serious flooding to one’s home. Those clogged downspouts or badly established door thresholds can let water into your house and to the surface. This gives mold a superior spot to grow and leave more damage.

To resolve this problem, you must find a juncture provider who knows specific decontamination guidelines. They will let you know what items you will be needing in order to choose what things to throw away and which ones can still be kept.

6. Repair Leaky Drainage Systems or Other Sources of Water

If you have experienced any water damage in your home, act fast to stop the leakages by shutting off the main water pipe. The main solution to stop developing molds is to control dampness.

After taking a shower, make sure to wipe the water off the bathroom walls. In that way, you can remove at least three-fourths of the moisture that causes mold and mildew growth. 

Also, one of the most important things to know on how to prevent mold after water damage is to act quickly in an emergency. A pouring plumbing leak can moist a few gallons per minute into your home. The longer things stay moist, the more you’ll have concrete damage.

Conclusion

To conclude, having molds around in your household puts your health safety at risk. Mold can yield toxic chemicals called mycotoxins. These can generate diseases and even death. That’s why you should follow the tips above if you want to control molds in your home. If the mold you’re going to remove, better seek professional help.

In hiring a professional, they do not just concentrate on the removal of mold. They analyze the source of mold sprout before they begin the mold remediation process. This way, they can know how severe the mold problem is. After that, they will advise you what’s the best action to get rid of mold and prevent them from coming back

For mold information and testing services, visit https://quest-testing.com